Araldite takes the heat out of the kitchen

Here's a great idea on how you can save money and customise your kitchen accessories at the same time!  









Use Araldite(R) Indoor Fix to make contemporary looking trivets to protect your work surfaces.







This newly refurbished kitchen features oiled-oak blockboard wood surfaces and slip tiles arranged in brick format.  Using spare tiles, some pieces of finished timber and Araldite(R) Indoor Fix, we made some modern looking trivets to protect the surfaces from hot pans and dishes.






We applied the adhesive in 'beads' to ensure regular spread and contact.







Then laid the tiles, applying firm pressure to each for about 20 seconds.







We used a spare tile just to check the alignment of the trivet surface.







Two matching trivets give us portable protection for wood surfaces and they look great with the decor.







Araldite(R) Indoor Fix adhesive sets in 20 seconds under firm pressure and builds to full strength in 72 hours but our trivets were in use the next day.

If you prefer a different finish we suggest grouting the tiles and painting the base to match your chosen colour scheme.






Please note that the information and suggested application uses on this website are published for general information purposes only.  We do not make any warranties about the completeness, reliability or accuracy of this information.  Any action that you take based on the information on this website is at your own risk. We will not be liable for any losses and/or damages in connection with the use of our products.

While ARALDITE RAPID does not contain any highly toxic components, it also does not meet the very strict standards required in order to be considered an acceptable food contact material in the EU. Thus we cannot support using a mug glued with ARALDITE RAPID.  


Copyright © 2022 Go-Araldite®. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.