Taking the mountain to Araldite

All sports boards take a lot of punishment from wind, weather and in use!

This mountain board has developed a surface crack which threatens to develop into something worse.










Araldite Rapid used with fibreglass sheet will fill, seal and repair the fault.  First we clean down the surface using white spirit.












Then remove surface imperfections with abrasive paper.












Araldite Rapid is a tough, durable two-part epoxy - we use equal amounts of resin and hardener to ensure 5 minute working time and 20 minute handling time.












Mixing thoroughly for at least 30 seconds.












Apply the adhesive over the damaged area with the spatula provided in the Araldite Repair pack.












Lay the fibreglass down and further apply adhesive over the top to encapsulate it.


Araldite Rapid achieves full strength in 3 hours and we left the board overnight before sanding the repair to a smooth finish ready for repainting.










Please note that the information and suggested application uses on this website are published for general information purposes only.  We do not make any warranties about the completeness, reliability or accuracy of this information.  Any action that you take based on the information on this website is at your own risk. We will not be liable for any losses and/or damages in connection with the use of our products.

While ARALDITE RAPID does not contain any highly toxic components, it also does not meet the very strict standards required in order to be considered an acceptable food contact material in the EU. Thus we cannot support using a mug glued with ARALDITE RAPID. 

Copyright © 2022 Go-Araldite®. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.