Araldite®  Fusion 3g

A strong, long lasting solvent-free adhesive which gives the bonding power of a 2 part adhesive without mixing. Express setting in just 90 seconds.

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent.
During assembly apply light pressure to the joint until set: around 4 minutes. Allow 2 hours to attain full strength before rough handling or sanding.


How to apply
Araldite® Fusion is a strong 2-component epoxy with very fast setting. Sets clear. Can be painted and sanded. Water, oil, chemical and impact resistant. High temperature resistance (-30°C to 65°C).
This is a one shot product which cannot be re-used. Do not try to open the syringe after application even if it contains some remaining material.

Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.

Should be stored in a dry place at room temperature in the original syringe.

Environmentally friendly product formulation plus eco-friendly packaging for easy recycling.

  Download this page as a pdf file


Copyright © 2018 Go-Araldite®. All Rights Reserved.
Joomla! is Free Software released under the GNU General Public License.